| 1 |
Standard:
J993: Alloy and Temper Designation Systems for Aluminum |
| 2. |
Standard:
AMSC5541: Chemical Conversion Coatings on Aluminum and Aluminum
Alloys |
| 3. |
Standard:
AMSQQA250/5: Aluminum Alloy Alclad 2024, Plate and Sheet |
| 4. |
Standard:
J452: General Information—Chemical Compositions, Mechanical
and Physical Properties of SAE Aluminum Casting Alloys |
| 5. |
Standard:
AMS2469: Hard Anodic Coating Treatment of Aluminum and Aluminum
Alloys Processing and Performance Requirements |
| 6. |
Standard:
AMS2673: Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip) |
| 7. |
Standard:
AMS7488: Rings, Flash Welded Aluminum and Aluminum Alloys |
| 8. |
Standard:
AMSQQA225: Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special
Shapes- Rolled, Drawn, or Cold Finished-General Specification
For |
| 9. |
Standard:
AMSQQA250: Aluminum and Aluminum Alloy, Plate and Sheet General
Specification for |
| 10. |
Standard:
AMSQQA250/13: Aluminum Alloy Alclad 7075, Plate and Sheet |
| 11. |
Standard:
AMSQQA250/15: Aluminum Alloy Alclad 7178, Plate and Sheet |
| 12. |
Standard:
AMSQQA250/18: Aluminum Alloy, Alclad One Side 7075, Plate and
Sheet |
| 13. |
Standard:
AMSQQA250/22: Aluminum Alloy, 7178-T76, Alclad Plate and Sheet,
Improved Exfoliation Resistant |
| 14. |
Standard:
AMSQQA250/25: Aluminum Alloy, Alclad 7075 Plate and Sheet Improved
Exfoliation Resistant |
| 15. |
Standard:
AMSQQA250/26: Aluminum Alloy, 7011 Alclad, 7075 Plate and Sheet |
| 16. |
Standard:
AMSQQA250/28: Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet |
| 17. |
Standard:
AMSQQA250/3: Aluminum Alloy Alclad 2014, Plate and Sheet |
| 18. |
Standard:
ARP1675: Structural Weldbonding of Aluminum Structures |
| 19. |
Standard:
J451: Aluminum Alloys—Fundamentals |
| 20. |
Standard:
J454: General Data on Wrought Aluminum Alloys |
| 21. |
Standard:
AMS2420: Plating of Aluminum For Solderability, Zinc Immersion
Pre-Treatment Process |
| 22. |
Standard:
AMS2427: Aluminum Coating, Ion Vapor Deposition |
| 23. |
Standard:
AMS2474: Chemical Treatment For Aluminum Alloys, Low Electrical
Resistance Coating |
| 24. |
Standard:
AMS2482: Hard Coating Treatment of Aluminum Alloys Teflon-Impregnated
or Codeposited |
| 25. |
Standard:
AMS2514: Anodic Coating on Aluminum Alloys Sulfuric Acid Process
Resin-Sealed |
| 26. |
Standard:
AMS2672: Brazing, Aluminum Torch or Furnace |
| 27. |
Standard:
AMS4012: Aluminum Sheet, Laminated, Edge Bonded (NONCURRENT
Aug 1992) |
| 28. |
Standard:
AMS4013: Aluminum Sheet, Laminated, Surface Bonded |
| 29. |
Standard:
AMS4036: Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu
- 1.5Mg - 0.60Mn Alclad One Side 2024 and 1-1/2% Alcald One
Side 2024-T3 Sheet- 1-1/2% Alclad One Side 2024-T351 Plate |
| 30. |
Standard:
AMS4041: Aluminum Alloy, Alclad Sheet Plate 4.4Cu - 1.5Mg -
0.60Mn Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat Sheet- 1-1/2%
Alclad 2024-T351 Plate |
| 31. |
Standard:
AMS4254: Aluminum Alloy, Aramid Fiber Reinforced, Laminated
Sheet 4.4Cu - 1.5Mg - 0.6Mn (2024-T3) 3, 5, 7, or 9 Ply |
| 32. |
Standard:
AMS4270: Aluminum Alloy, Alclad Flat Sheet 4.1Cu - 1.4Mg - 0.45Mn
(Alclad 2424-T3) Solution Heat Treated and Cold Worked |
| 33. |
Standard:
AMSA8625: Anodic Coatings for Aluminum and Aluminum Alloys |
| 34. |
Standard:
AMSB20148: Brazing Sheet, Aluminum Alloy |
| 35. |
Standard:
AMSH6088: Heat Treatment of Aluminum Alloys (Cancelled Jul 2000) |
| 36. |
Standard:
AMSWWT700: Tube, Aluminum and Aluminum Alloy, Drawn, Seamless,
General Specification for |
| 37. |
Standard:
AS70991: Terminals: Lug and Splice, Crimp Style, Aluminum, For
Aluminum Aircraft Wire |
| 38. |
Standard:
AS7220: Aluminum Rivets, UNS A91100, 99Al (1100-H14) |
| 39. |
Standard:
AS7222: Aluminum Rivets, UNS A92117 2.5Cu 0.3Mg (2117-T4) |
| 40. |
Standard:
EN2004/10: Aerospace series--Test methods for aluminum and aluminum
alloy products--Part 10--Preparation of micrographic specimens
for aluminum alloys |
| 41. |
Standard:
EN2004/2: Test methods for aluminum and aluminum alloy products--Part
2--Ultrasonic testing of plates forgings and extrusions--Aerospace
series |
| 42. |
Standard:
EN2004/4: Aerospace series--Test methods for aluminum and aluminum
alloy products--Part 4--Stress corrosion test by alternate immersion
for high strength aluminum alloy wrought products (Inactive
for New Design) |
| 43. |
Standard:
J1434: Wrought Aluminum Applications Guidelines |
| 44. |
Standard:
J457: Chemical Compositions, Mechanical Property Limits, and
Dimensional Tolerances of SAE Wrought Aluminum Alloys |
| 45. |
Standard:
MAM2201: Tolerances, Metric, Aluminum and Aluminum Alloy Bar,
Rod, Wire, and Forging Stock, Rolled, Drawn, or Cold Finished |
| 46. |
Standard:
AMS1625: Desmutter, Aluminum, Powdered |
| 47. |
Standard:
AMS1626: Desmutter, Aluminum, Liquid |
| 48. |
Standard:
AMS2202: Tolerances, Aluminum Alloy and Magnesium Alloy Sheet
and Plate (Cancelled Aug 1996) |
| 49. |
Standard:
AMS2205: Tolerances, Aluminum Alloy and Magnesium Alloy Extrusions
(Reaffirmed, 1991) (Cancelled and Superseded by ANSI H35.2,
Aug 96) |
| 50. |
Standard:
AMS2355: Quality Assurance Sampling and Testing Aluminum Alloys
and Magnesium Alloys, Wrought Products, Except Forging Stock,
and Rolled, Forged, or Flash Welded Rings |
| 51. |
Standard:
AMS2409: Plating, Immersion Tin for Aluminum Alloys |
| 52. |
Standard:
AMS2436: Coating, Aluminum Oxide Detonation Deposition |
| 53. |
Standard:
AMS2450: Sprayed Metal Finish, Aluminum (NONCURRENT Sep 1994) |
| 54. |
Standard:
AMS2470: Anodic Treatment of Aluminum Alloys Chrome Acid Process |
| 55. |
Standard:
AMS2471: Anodic Treatment of Aluminum Alloys, Sulfuric Acid
Process, Undyed Coating |
| 56. |
Standard:
AMS2472: Anodic Treatment of Aluminum Alloys, Sulfuric Acid
Process, Dyed Coating |
| 57. |
Standard:
AMS2473: Chemical Film Treatment For Aluminum Alloys, General
Purpose Coating |
| 58. |
Standard:
AMS2483: Blackening Solution for Aluminum, Touch-Up Solution |
| 59. |
Standard:
AMS2505: Aluminum Paint Finishing Low Baking (Noncurrent Jan
2000) |
| 60. |
Standard:
AMS2506: Coating of Fasteners, Aluminum Filled, Ceramic Bonded
Coating |
| 61. |
Standard:
AMS2658: Hardness and Conductivity Inspection of Wrought Aluminum
Alloy Parts |
| 62. |
Standard:
AMS2770: Heat Treatment of Wrought Aluminum Alloy Parts |
| 63. |
Standard:
AMS2771: Heat Treatment of Aluminum Alloy Castings |
| 64. |
Standard:
AMS2772: 4Heat Treatment of Aluminum Alloy Raw Materials |
| 65. |
Standard:
AMS2811: Identification, Aluminum and Magnesium Alloy Wrought
Products (Cancelled May 1998) |
| 66. |
Standard:
AMS3126: Aluminum Coating Material, Corrosion and Heat Resistant,
Thermosetting, Inorganic Binder (Noncurrent 8-2001) |
| 67. |
Standard:
AMS3128: Aluminum Pigment Paste (noncurrent Jan 2000) |
| 68. |
Standard:
AMS3412: Flux, Aluminum Brazing For Torch or Furnace Brazing |
| 69. |
Standard:
AMS3414: Flux, Aluminum Welding |
| 70. |
Standard:
AMS3415: Flux, Aluminum Dip Brazing 1030 °F (554 °C) or Lower
Liquidus |
| 71. |
Standard:
AMS3416: Flux, Aluminum Dip Brazing, 1090 °F (588 °C), Fusion
Point |
| 72. |
Standard:
AMS3673: Cloth, Glass, Aluminum Face, Silicone Rubber Back |
| 73. |
Standard:
AMS3807: Tape, Aluminum Foil, Sound and Vibration Damping Pressure
Sensitive Adhesive |
| 74. |
Standard:
AMS4000: Aluminum Sheet and Plate (1060-0) |
| 75. |
Standard:
AMS4001: Aluminum Sheet and Plate 0.12Cu (1100-0) Annealed |
| 76. |
Standard:
AMS4003: Aluminum Alloy, Sheet and Plate 0.12Cu (1100-H14) Strain
Hardened |
| 77. |
Standard:
AMS4004: Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain
Hardened |
| 78. |
Standard:
AMS4005: Aluminum Alloy, Foil, 5.0Mg - 0.12Mn - 0.12Cr (5056-H191)
Strain Hardened |
| 79. |
Standard:
AMS4006: Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-0),
Annealed |
| 80. |
Standard:
AMS4007: Aluminum Alloy Foil 4.4Cu - 1.5Mg - 0.6Mn (2024-0)
(Cancelled Aug 99) |
| 81. |
Standard:
AMS4008: Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-H14)
Strain Hardened |
| 82. |
Standard:
AMS4009: Aluminum Alloy Foil 1.0Mg - 0.6Si - 0.30Cu - 0.20Cr
(6061-0) Annealed |
| 83. |
Standard:
AMS4010: Aluminum Alloy Foil 1.2Mn - 0.12Cu (3003-H18) |
| 84. |
Standard:
AMS4011: Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0)
Annealed |
| 85. |
Standard:
AMS4015: Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-0)
Annealed |
| 86. |
Standard:
AMS4016: Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32),
Strain Hardened, Quarter-Hard, and Stabilized |
| 87. |
Standard:
AMS4017: Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H34),
Strain-Hardened, Half-Hard, and Stabilized |
| 88. |
Standard:
AMS4021: Aluminum Alloy, Alclad Sheet and Plate, 1.0Mg - 0.60Si
- 0.28Cu - 0.20Cr (Alclad 6061-0) Annealed |
| 89. |
Standard:
AMS4025: Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061-0) Annealed |
| 90. |
Standard:
AMS4026: Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061- -T4 Sheet- -T451 Plate) Solution Heat Treated
and Naturally Aged |
| 91. |
Standard:
AMS4027: Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061- -T6 Sheet, -T651 Plate), Solution and Precipitation
Heat Treated |
| 92. |
Standard:
AMS4028: Aluminum Alloy, Sheet and Plate 4.4Cu - 0.85Si - 0.80Mn
- 0.50Mg (2014-0), Annealed |
| 93. |
Standard:
AMS4029: Aluminum Alloy Sheet and Plate (2014- -T6 Sheet, -T651
Plate) Solution and Precipitation Heat Treated |
| 94. |
Standard:
AMS4031: Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr
- 0.10V - 0.06Ti (2219-0) Annealed |
| 95. |
Standard:
AMS4035: Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn
(2024-0) Annealed |
| 96. |
Standard:
AMS4037: Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn
(2024- -T3 Flat Sheet, -T351 Plate) Solution Heat Treated |
| 97. |
Standard:
AMS4040: Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg
- 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-0) Annealed |
| 98. |
Standard:
AMS4044: Aluminum Alloy, Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu
- 0.23Cr (7075-0) Annealed |
| 99. |
Standard:
AMS4045: Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu
- 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation
Heat Treated |
| 100. |
Standard:
AMS4046: Aluminum Alloy, Sheet and Plate, Alclad One Side 5.6Zn
- 2.5Mg - 1.6Cu - 0.23Cr (Alclad One Side 7075- -T6 Sheet -T651
Plate) Solution and Precipitation Heat Treated |
| 101. |
Standard:
AMS4048: Aluminum Alloy Sheet and Plate, Alclad, 5.6Zn - 2.5Mg
- 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed |
| 102. |
Standard:
AMS4049: Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg
- 01.6Cu - 0.23Cr (Alclad 7075- -T6 Sheet - T651 Plate) Solution
and Precipitation Heat Treated |
| 103. |
Standard:
AMS4050: Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr
(7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged |
| 104. |
Standard:
AMS4051: Aluminum Alloy Sheet and Plate, Alclad 6.8Zn - 2.8Mg
- 2.0Cu - 0.23Cr (Alclad 7178-0) Annealed (NONCURRENT Apr 1986) |
| 105. |
Standard:
AMS4056: Aluminum Alloy, Sheet and Plate, 4.4Mg - 0.70Mn - 0.15Cr
(5083-0) Annealed |
| 106. |
Standard:
AMS4062: Aluminum Alloy, Drawn Seamless Round Tubing (1100-H14)
Strain Hardened |
| 107. |
Standard:
AMS4063: Aluminum Alloy, Clad One Side Sheet, 1.25Mn - 0.12Cu
(No. 11-0 Brazing Sheet), Annealed |
| 108. |
Standard:
AMS4064: Aluminum Alloy, Clad Two Sides Sheet, 1.25Mn - 0.12Cu
(No. 12-0 Brazing Sheet), Annealed |
| 109. |
Standard:
AMS4065: Aluminum Alloy, Drawn Seamless Tubing 1.2Mn - 0.12Cu
(3003-0) Annealed |
| 110. |
Standard:
AMS4066: Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu
- 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219-T8511), Solution
Heat Treated, Stress Relieved by Stretching, and Precipitation
Heat Treated |
| 111. |
Standard:
AMS4067: Aluminum Alloy, Drawn Round Seamless Tubing 1.25Mn
- 0.12Cu (3003-H14) Strain Hardened |
| 112. |
Standard:
AMS4068: Aluminum Alloy, Drawn Seamless Tubing 6.3Cu - 0.30Mn
- 0.18Zr - 0.10V - 0.06Ti (2219-T3511), Solution Heat Treated
and Stress Relieved by Stretching |
| 113. |
Standard:
AMS4069: Aluminum Alloy, Drawn, Round Seamless Tubing Close
Tolerance 2.5Mg - 0.25Cr (5052-0) Annealed |
| 114. |
Standard:
AMS4070: Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg
- 0.25Cr (5052-0) Annealed |
| 115. |
Standard:
AMS4071: Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing
2.5Mg - 0.25Cr (5052-0) Annealed |
| 116. |
Standard:
AMS4077: Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu
- 1.5Mg - 0.60Mn (Clad One Side 2024-0) Annealed |
| 117. |
Standard:
AMS4078: Aluminum Alloy Plate (7075-T7351) Solution Heat Treated,
Stress Relieved, and Overaged |
| 118. |
Standard:
AMS4079: Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg
- 0.6Si - 0.28Cu - 0.20Cr (6061-0) Close Tolerance, Annealed |
| 119. |
Standard:
AMS4080: Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si
- 0.28Cu - 0.20Cr (6061-0) Annealed |
| 120. |
Standard:
AMS4081: Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn,
Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat
Treated and Naturally Aged |
| 121. |
Standard:
AMS4082: Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si
- 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat
Treated |
| 122. |
Standard:
AMS4083: Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn,
Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and
Precipitation Heat Treated |
| 123. |
Standard:
AMS4084: Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr
(7475-T61) Solution and Precipitation Heat Treated |
| 124. |
Standard:
AMS4085: Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr
(7475-T761) Solution Heat Treated and Overaged |
| 125. |
Standard:
AMS4086: Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing,
4.4Cu - 1.5Mg - 0.6Mn (2024-T3) Solution Heat Treated, Cold
Worked and Naturally Aged |
| 126. |
Standard:
AMS4087: Aluminum Alloy Tubing, Seamless, Drawn, (2024-0) Reinstate
Composition Annealed |
| 127. |
Standard:
AMS4088: Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg
- 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked |
| 128. |
Standard:
AMS4089: Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn
(7475-T7651) Solution Heat Treated, Stress Relieved by Stretching,
and Precipitation Heat Treated |
| 129. |
Standard:
AMS4090: Aluminum Alloy, Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr
(7475-T651) Solution Heat Treated, Stress Relieved, and Precipitation
Heat Treated |
| 130. |
Standard:
AMS4094: Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn
- 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat
Treated, Cold Worked, and Precipitation Heat Treated Alclad
2219-T851 Plate Solution Heat Treated, Stress Relieved and Prec |
| 131. |
Standard:
AMS4095: Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn
- 0.18Zr - 0.10V - 0.06Ti, Alclad 2219-T31- Sheet, Solution
Heat Treated and Cold Worked Alclad 2219-T351- Plate, Solution
Heat Treated and Stress Relieved |
| 132. |
Standard:
AMS4100: Aluminum Alloy, Alclad, Sheet, 5.7Zn - 2.2Mg - 1.6Cu
- 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat
Treated |
| 133. |
Standard:
AMS4101: Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851)
Solution Heat Treated, Stretched, and Precipitation Heat Treated |
| 134. |
Standard:
AMS4102: Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold-Finished
99.0A1 (1100-T) As Fabricated |
| 135. |
Standard:
AMS4107: Aluminum Alloy Die Forgings (7050-T74) Solution Heat
Treated and Overaged |
| 136. |
Standard:
AMS4108: Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg
- 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved,
and Overaged |
| 137. |
Standard:
AMS4111: Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr
(7049-T73), Solution and Precipitation Heat Treated |
| 138. |
Standard:
AMS4113: Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si -
0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated |
| 139. |
Standard:
AMS4114: Aluminum Alloy Bars and Rods, Rolled or Cold-Finished,
2.5Mg - 0.25Cr (5052-F), As Fabricated |
| 140. |
Standard:
AMS4115: Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods,
Wire, and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr
(6061-0) Annealed |
| 141. |
Standard:
AMS4116: Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si
- 0.30Cu - 0.20Cr (6061-T4) Cold Finished, Solution Heat Treated |
| 142. |
Standard:
AMS4117: Aluminum Alloy, Rolled or Cold Finished Bars, Rods,
and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr
(6061- -T6, -T651) Solution and Precipitation Heat Treated |
| 143. |
Standard:
AMS4118: Aluminum Alloy, Rolled or Cold Finished Bars, Rods,
and Wire, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017- -T4, -T451)
Solution Heat Treated |
| 144. |
Standard:
AMS4120: Aluminum Alloy, Rolled or Cold Finished Bars, Rods,
and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated
and Naturally Aged (T4) Solution Heat Treated, Cold Worked,
and Naturally Aged (T351) |
| 145. |
Standard:
AMS4121: Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold
Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution
and Precipitation Heat Treated |
| 146. |
Standard:
AMS4122: Aluminum Alloy Bars, Rods, and Wire Rolled or Cold
Finished, and Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6)
Solution and Precipitation Heat Treated |
| 147. |
Standard:
AMS4123: Aluminum Alloy, Rolled or Cold Finished Bars and Rods
(7075-T651) Solution and Precipitation Heat Treated |
| 148. |
Standard:
AMS4125: Aluminum Alloy Die Forgings, and Rolled or Forged Rings
0.90Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation
Heat Treated |
| 149. |
Standard:
AMS4126: Aluminum Alloy, Die and Hand Forgings and Rolled Rings
5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation
Heat Treated |
| 150. |
Standard:
AMS4127: Aluminum Alloy, Forgings and Rolled or Forged Rings
(6061-T6) Solution and Precipitation Heat Treated |
| 151. |
Standard:
AMS4128: Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg
- 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated
and Stress Relieved by Stretching |
| 152. |
Standard:
AMS4130: Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn
(2025-T6) Solution and Precipitation Heat Treated |
| 153. |
Standard:
AMS4131: Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg
- 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged |
| 154. |
Standard:
AMS4132: Aluminum Alloy, Die and Hand Forgings, Rolled Rings,
and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti
(2618-T61) Solution and Precipitation Heat Treated |
| 155. |
Standard:
AMS4133: Aluminum Alloy Forgings and Rolled Rings, 4.4Cu - 0.85Si
- 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat
Treated |
| 156. |
Standard:
AMS4134: Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn
- 0.50Mg (2014-T4) Solution Heat Treated |
| 157. |
Standard:
AMS4138: Aluminum Alloy Forgings 4.3Zn - 3.3Mg - 0.60Cu - 0.20Mn
- 0.18Cr (7079-T6) |
| 158. |
Standard:
AMS4140: Aluminum Alloy Die Forgings 4.0Cu - 2.0Ni - 0.68Mg
(2018-T61) Solution and Precipitation Heat Treated |
| 159. |
Standard:
AMS4141: Aluminum Alloy Die Forgings, 5.6Zn - 2.5Mg - 1.6Cu
- 0.23Cr (7075-T73) Solution and Precipitation Heat Treated |
| 160. |
Standard:
AMS4143: Aluminum Alloy Forgings and Rolled or Forged Rings
6.3Cu - 0.3Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and
Precipitation Heat Treated |
| 161. |
Standard:
AMS4144: Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu
- 0.30Mn - 0.18Zr - 0.10V 0.06Ti (2219-T852/T851) Solution Heat
Treated, Mechanically Stress Relieved, and Precipitation Heat
Treated |
| 162. |
Standard:
AMS4146: Aluminum Alloy Forgings and Rolled or Forged Rings
1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated
and Naturally Aged |
| 163. |
Standard:
AMS4147: Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr
(7075-T7352) Solution Heat Treated, Stress Relieved by Compression,
and Overaged |
| 164. |
Standard:
AMS4148: Aluminum Alloy Die Forgings (7175-T66) Solution and
Precipitation Heat Treated |
| 165. |
Standard:
AMS4149: Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg
- 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat
Treated |
| 166. |
Standard:
AMS4150: Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si
- 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat
Treated |
| 167. |
Standard:
AMS4152: Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3)
Solution Heat Treated |
| 168. |
Standard:
AMS4153: Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn
- 0.50Mg (2014-T6) Solution and Precipitation Heat Treated |
| 169. |
Standard:
AMS4154: Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (7075-T6) Solution and Precipitation Heat Treated |
| 170. |
Standard:
AMS4156: Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6)
Solution and Precipitation Heat Treated |
| 171. |
Standard:
AMS4157: Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu -
0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved,
and Overaged |
| 172. |
Standard:
AMS4159: Aluminum Alloy, Extrusions, 7.7Zn - 2.4Mg - 1.6Cu -
0.16Cr (7049-T76511) Solution Heat Treated, Stress Relieved,
Straightened, and Overaged |
| 173. |
Standard:
AMS4160: Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061-0) Annealed |
| 174. |
Standard:
AMS4161: Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged |
| 175. |
Standard:
AMS4162: Aluminum Alloy, Extrusions, 6.3Cu - 0.30Mn - 0.18Zr
- 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief
Stretched, Straightened, and Precipitation Heat Treated |
| 176. |
Standard:
AMS4163: Aluminum Alloy, Extrusions, 6.3Cu - 0.30Mn - 0.18Zr
- 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved
by Stretching, and Straightened |
| 177. |
Standard:
AMS4164: Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn
(2024-T3510) Stress-Relief Stretched, Unstraightened |
| 178. |
Standard:
AMS4165: Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511)
Solution Heat Treated, Stress-Relieved by Stretching, and Straightened |
| 179. |
Standard:
AMS4166: Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (7075-T73) Solution Heat Treated and Overaged |
| 180. |
Standard:
AMS4167: Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (7075-T73511) Solution Heat Treated, Stress Relieved
by Stretching, and Overaged |
| 181. |
Standard:
AMS4168: Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by
Stretching, and Precipitation Heat Treated, Unstraightened |
| 182. |
Standard:
AMS4169: Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by
Stretching, Straightened and Precipitation Heat Treated |
| 183. |
Standard:
AMS4172: Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved
by Stretching |
| 184. |
Standard:
AMS4173: Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu
- 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved
by Stretching, Straightened, and Precipitation Heat Treated |
| 185. |
Standard:
AMS4174: Aluminum Alloy, Flash Welded Rings, 5.6Zn - 2.5Mg -
1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated |
| 186. |
Standard:
AMS4175: Honeycomb Core, Aluminum Alloy, For Sandwich Construction,
5052, 350 (175) (NONCURRENT Jul 1992) |
| 187. |
Standard:
AMS4176: Honeycomb Core, Aluminum Alloy, For Sandwich Construction,
5056, 350 (175) (NONCURRENT Jul 1992) |
| 188. |
Standard:
AMS4177: Core, Flexible Honeycomb, Aluminum Alloy, for Sandwich
Construction, 5056, 350 (177) |
| 189. |
Standard:
AMS4178: Core, Flexible Honeycomb, Aluminum Alloy, Treated,
For Sandwich Construction, 5052, 350 (177) |
| 190. |
Standard:
AMS4179: Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr
(7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation
Heat Treated |
| 191. |
Standard:
AMS4180: Aluminum Wire, 99.0Al Minimum (1100-H18) |
| 192. |
Standard:
AMS4181: Aluminum Alloy, Welding Wire 7.0Si - 0.38Mg - 0.10Ti
(4008) |
| 193. |
Standard:
AMS4182: Aluminum Alloy, Wire 5.0Mg - 0.12Mn - 0.12Cr (5056-0),
Annealed |
| 194. |
Standard:
AMS4184: Filler Metal, Aluminum Brazing, 10Si - 4.0Cu (4145) |
| 195. |
Standard:
AMS4185: Filler Metal, Aluminum Brazing, 12Si (4047) |
| 196. |
Standard:
AMS4186: Aluminum Alloy, Bars, Rods, and Wire, Rolled or Cold
Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated |
| 197. |
Standard:
AMS4189: Aluminum Alloy, Welding Wire 4.1Si - 0.20Mg (4643) |
| 198. |
Standard:
AMS4190: Aluminum Alloy, Welding Wire 5.2Si (4043) |
| 199. |
Standard:
AMS4191: Aluminum Alloy, Welding Wire, 6.3Cu - 0.30Mn - 0.18Zr
- 0.15Ti - 0.10V (2319) |
| 200. |
Standard:
AMS4193: Aluminum Alloy Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn
(2024-T861) Solution Heat Treated, Cold Worked, and Precipitation
Heat Treated |
| 201. |
Standard:
AMS4194: Aluminum Alloy Sheet and Plate, Alclad, 4.4Cu - 1.5Mg
- 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T361 Flat Sheet-
1-1/2% Alclad 2024-T361 Plate) Solution Heat Treated and Cold
Worked |
| 202. |
Standard:
AMS4195: Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg
- 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet-
1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked,
and Precipitation Heat Treated |
| 203. |
Standard:
AMS4200: Aluminum Alloy Plate 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr
(7049-T7351) Solution Heat Treated, Stress Relieved, and Precipitation
Heat Treated |
| 204. |
Standard:
AMS4201: Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr
(7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged |
| 205. |
Standard:
AMS4202: Aluminum Alloy Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr
(7475-T7351) Solution Heat Treated, Stress Relieved by Stretching,
and Precipitation Heat Treated |
| 206. |
Standard:
AMS4203: Aluminum Alloy, Plate, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr
(7010-T7351), Solution Heat Treated, Stress Relieved, and Precipitation
Heat Treated |
| 207. |
Standard:
AMS4204: Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr
(7010-T7651) Solution Heat Treated, Stress Relieved, and Precipitation
Heat Treated |
| 208. |
Standard:
AMS4205: Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr
(7010-T73651) or (7010-T7451) Solution Heat Treated, Stress
Relieved, and Precipitation Heat Treated |
| 209. |
Standard:
AMS4207: Aluminum Alloy Sheet, Alclad, 5.7Zn - 2.2Mg - 1.6Cu
- 0.22Cr (7475-T61) Solution and Precipitation Heat Treated |
| 210. |
Standard:
AMS4208: Aluminum Alloy Sheet, 6.0Cu -0.40Zr (2004-F) As Rolled |
| 211. |
Standard:
AMS4209: Aluminum Alloy Sheet, Alclad, 6.0Cu - 0.40Zr (2004-F)
As Rolled |
| 212. |
Standard:
AMS4210: Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51)
Precipitation Heat Treated |
| 213. |
Standard:
AMS4212: Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6)
Solution and Precipitation Heat Treated |
| 214. |
Standard:
AMS4214: Castings, Aluminum Alloy Sand 5.0Si -1.2Cu - 0.50Mg
(355.0-T71) Solution Heat Treated and Stabilized |
| 215. |
Standard:
AMS4215: Aluminum Alloy, Castings 5.0Si -1.2Cu - 0.50Mg (C355.0-T6)
Solution and Precipitation Heat Treated |
| 216. |
Standard:
AMS4216: Aluminum Alloy, Sheet, 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn
(6013-T6) Solution Heat Treated and Artificially Aged |
| 217. |
Standard:
AMS4217: Aluminum Alloy, Castings 7Si - 0.32Mg (356.0-T6) Solution
and Precipitation Heat Treated |
| 218. |
Standard:
AMS4218: Aluminum Alloy Castings, 7.0Si - 0.35Mg (A356.0-T6P)
(Formerly T61P Temper) Solution and Precipitation Heat Treated |
| 219. |
Standard:
AMS4219: Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti - 0.06Be
(A357.0 T61) Solution and Precipitation Heat Treated |
| 220. |
Standard:
AMS4221: Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151)
Solution Heat Treated, Stress Relieved, and Precipitation Heat
Treated |
| 221. |
Standard:
AMS4223: Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn -
0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally
Aged |
| 222. |
Standard:
AMS4224: Aluminum Alloy Castings, Sand, 4.0Cu - 2.1Ni - 2.0Mg
- 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0), Stabilized |
| 223. |
Standard:
AMS4225: Aluminum Alloy, Heat Resistant, Castings 5.0Cu - 1.5Ni
- 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T7) Solution
Heat Treated and Stabilized |
| 224. |
Standard:
AMS4227: Aluminum Alloy, Castings, Sand, 8.0Cu - 6.0Mg - 0.50Mn
- 0.50Ni (A240.0-F) As Cast |
| 225. |
Standard:
AMS4229: Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag
- 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated
and Overaged |
| 226. |
Standard:
AMS4232: Aluminum Alloy Extrusions, 2.7Cu - 2.2Li - 0.12Zr (2090-T86),
Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| 227. |
Standard:
AMS4233: Aluminum Alloy, Welding Wire 4.5Cu - 0.70Ag - 0.30Mn
- 0.25Mg - 0.25Ti (201) |
| 228. |
Standard:
AMS4235: Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti
(A206.0-T71) Solution and Precipitation Heat Treated |
| 229. |
Standard:
AMS4236: Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti
(A206.0-T4) Solution Heat Treated and Naturally Aged |
| 230. |
Standard:
AMS4237: Aluminum Alloy Castings, Sand, 4.6Cu - 0.35Mn - 0.25Mg
- 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged |
| 231. |
Standard:
AMS4238: Aluminum Alloy Castings, Sand 6.8Mg - 0.18Ti - 0.18Mn
(535.0-F), As Cast |
| 232. |
Standard:
AMS4239: Aluminum Alloy Castings, Sand 6.8Mg - 0.18Ti - 0.18Mn
(535.0-0), Annealed |
| 233. |
Standard:
AMS4241: Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be
(D357.0-T6) Solution and Precipitation Heat Treated Dendrite
Arm Spacing (DAS) Controlled |
| 234. |
Standard:
AMS4242: Aluminum Alloy, Castings, 4.7Cu - 0.60Ag - 0.35Mn -
0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged |
| 235. |
Standard:
AMS4243: Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg
- 0.12Zr (Alclad 7050-T76), Solution Heat Treated and Overaged |
| 236. |
Standard:
AMS4244: Aluminum Alloy Welding Wire 4.6Cu - 0.35Mn - 0.25Mg
- 0.22Ti for Welding 206 Type Alloys |
| 237. |
Standard:
AMS4245: Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg
(355) |
| 238. |
Standard:
AMS4246: Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357) |
| 239. |
Standard:
AMS4247: Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu
- 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved
by Compression, and Precipitation Heat Treated |
| 240. |
Standard:
AMS4248: Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg
- 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated,
Stress Relief by Compressed, and Precipitation Heat Treated |
| 241. |
Standard:
AMS4249: Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be
(D357.0-T6) Solution and Precipitation Heat Treated (Requiring
Fatigue and Fracture Toughness Testing) |
| 242. |
Standard:
AMS4251: Aluminum Alloy Sheet, 2.7Cu - 2.2Li - 0.12Zr (2090-T83),
Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| 243. |
Standard:
AMS4252: Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr
(7150-T7751), Solution Heat Treated, Stress Relieved, and Overaged |
| 244. |
Standard:
AMS4253: Aluminum Alloy-Aramid Fiber Reinforced-Laminated Sheet,
5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) 3, 5, 7, or 9 Ply |
| 245. |
Standard:
AMS4255: Aluminum Alloy, Clad One Side Sheet 0.6Mg - 0.35Si
- 0.28Cu (No. 21 Brazing Sheet) As Fabricated |
| 246. |
Standard:
AMS4256: Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si
- 0.28Cu (No. 22 Brazing Sheet) As Fabricated |
| 247. |
Standard:
AMS4258: Laminated Sheet, Aluminum Alloy, Aramid Fiber Reinforced
5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr. (Alclad, One Side 7475-T761)
5 or 7 Ply |
| 248. |
Standard:
AMS4259: Aluminum Alloy, Sheet 2.4Li - 1.3Cu - 0.95Mg - 0.10Zr
(8090-T6) Solution and Precipitation Heat Treated (Unrecrystallized)
(NONCURRENT Mar 2001) |
| 249. |
Standard:
AMS4260: Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg
(356.0-T6), Solution and Precipitation Heat Treated |
| 250. |
Standard:
AMS4261: Aluminum Alloy Castings, Investment 7.0Si - 0.32Mg
(356.0-T51) Precipitation Heat Treated |
| 251. |
Standard:
AMS4265: Aluminum Alloy, Particulate Reinforced Extrusions 6092/SiC/25p
- T6P Solution Heat Treated, Quenched, and Precipitation Heat
Treated (Cancelled Jul 2000) |
| 252. |
Standard:
AMS4266: Aluminum Alloy, Sheet 6.5Fe - 1.3Si - 0.60V (8022-H112)
Powder Metallurgy Product, Strain Hardened |
| 253. |
Standard:
AMS4273: Aluminum Alloy, Sheet and Plate (2424-T3 Flat Sheet
and Plate) Solution Heat Treated and Cold Worked |
| 254. |
Standard:
AMS4274: Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn
(Alclad 2024-0) Annealed, Fine Grain |
| 255. |
Standard:
AMS4276: Aluminum Alloy, Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024-0),
Annealed, Fine Grained |
| 256. |
Standard:
AMS4278: Aluminum Alloy, Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu
- 0.23Cr (Alclad 7075-0) Annealed, Fine Grained |
| 257. |
Standard:
AMS4279: Aluminum Alloy, Alclad Sheet, 4.4Cu - 1.5 Mg - 0.60Mn
(2024--T4 Flat Sheet), Solution Heat Treated, High Formability |
| 258. |
Standard:
AMS4280: Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu
- 0.5Mg (355.0-T71) Solution Heat Treated and Overaged |
| 259. |
Standard:
AMS4281: Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu
- 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated |
| 260. |
Standard:
AMS4284: Aluminum Alloy Castings, Permanent Mold, 7.0Si - 0.30Mg
(356.0-T6) Solution and Precipitation Heat Treated |
| 261. |
Standard:
AMS4285: Aluminum Alloy Castings, Centrifugal, 7.0Si - 0.30Mg
(356.0-T6) Solution and Precipitation Heat Treated |
| 262. |
Standard:
AMS4286: Aluminum Alloy, Castings, Permanent Mold 7.0Si - 0.32Mg
(356.0-T51), Precipitation Heat Treated |
| 263. |
Standard:
AMS4290: Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F),
As Cast |
| 264. |
Standard:
AMS4291: Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F)
As Cast |
| 265. |
Standard:
AMS4295: Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti
- 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87) |
| 266. |
Standard:
AMS4296: Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg
- 0.60Mn (Alclad 2524.T3) Solution Heat Treated and Cold Worked |
| 267. |
Standard:
AMS4297: Aluminum Alloy Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-
-T4 Flat Sheet) Solution Heat Treated, High Formability |
| 268. |
Standard:
AMS4300: Boron-Aluminum Composite Sheet, 50 v/o 5.6B, 6061-0,
For Diffusion Bonding |
| 269. |
Standard:
AMS4302: Aluminum Alloy, Laminated Sheet, Aramid Fiber Reinforced,
5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) 3, 5, 7, or 9 Ply |
| 270. |
Standard:
AMS4303: Aluminum Alloy Plate, 2.7Cu - 2.2Li - 0.12Zr (2090-T81),
Solution Heat Treated, Cold Worked, and Aged |
| 271. |
Standard:
AMS4304: Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15W
(T8P) Solution Heat Treated, Stretched, and Precipitation Heat
Treated |
| 272. |
Standard:
AMS4306: Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr
(7150-T6151) Solution Heat Treated, Stress Relieved, and Aged |
| 273. |
Standard:
AMS4307: Aluminum Alloy, Extrusions, 6.4Zn - 2.4Mg - 2.2Cu -
0.12Zr (7150-T61511) Solution Heat Treated, Stress Relieved
by Stretching, Straightened, and Precipitation Heat Treated |
| 274. |
Standard:
AMS4308: Aluminum Alloy, Sheet, 8.6Fe - 1.8Si - 1.3V (8009-H112)
Powder Metallurgy Product, Strain Hardened |
| 275. |
Standard:
AMS4309: Aluminum Alloy, Extrusions 8.6Fe - 1.8Si - 1.3V (8009-H112)
Powder Metallurgy Product, Strain-Hardened |
| 276. |
Standard:
AMS4310: Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg
- 1.6Cu - 0.23Cr (7075-T651, 7075-T652), Solution Heat Treated,
Mechanically Stress Relieved, and Precipitation Heat Treated |
| 277. |
Standard:
AMS4311: Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg
- 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated,
Mechanically Stress Relieved, and Precipitation Heat Treated |
| 278. |
Standard:
AMS4312: Aluminum Alloy Rings, Rolled or Forged Rings, 1.0Mg
- 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat
Treated, Mechanically Stress Relieved, and Precipitation Heat
Treated |
| 279. |
Standard:
AMS4313: Aluminum Alloy, Rolled or Forged Rings, 6.3Cu - 0.30Mn
- 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat
Treated and Mechanically Stress Relieved |
| 280. |
Standard:
AMS4314: Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si
- 0.80Mn - 0.50Mg (2014-T651), 2014-T652) Solution Heat Treated,
Mechanically Stress Relieved, and Precipitation Heat Treated |
| 281. |
Standard:
AMS4318: Aluminum Alloy, Rolled or Cold Finished Bars and Rods
12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated,
Cold Worked, and Artificially Aged |
| 282. |
Standard:
AMS4319: Aluminum Alloy, Rolled or Cold Finished, Bars and Rods,
12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated,
Stress-Relieved, and Artificially Aged |
| 283. |
Standard:
AMS4320: Aluminum Alloy Forgings, 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr
(7149-T73), Solution and Precipitation Heat Treated |
| 284. |
Standard:
AMS4321: Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr
(7049-01) High Temperature Annealed |
| 285. |
Standard:
AMS4322: Aluminum Alloy Die Forgings 4.0Mg - 1.3Li - 1.2C -
0.45O{sub}2 Mechanically Alloyed, As-Fabricated |
| 286. |
Standard:
AMS4323: Aluminum Alloy, Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu
- 0.23Cr (7075-T7452), Solution Heat Treated, Stress Relieved,
and Precipitation Heat Treated |
| 287. |
Standard:
AMS4333: Aluminum Alloy, Die Forgings, 6.2Zn - 2.3Cu - 2.2Mg
- 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved,
and Overaged |
| 288. |
Standard:
AMS4334: Aluminum Alloy, Forgings 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr
(7249-T74 and -T7452) |
| 289. |
Standard:
AMS4337: Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn
- 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved,
and Overaged |
| 290. |
Standard:
AMS4339: Aluminum Alloy, Rolled or Cold Finished Bars and Rods
4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold
Worked, and Artificially Aged |
| 291. |
Standard:
AMS4340: Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg -
0.12Zr (7050-T76511), Solution Heat Treated, Stress Relieved,
Straightened, and Overaged |
| 292. |
Standard:
AMS4341: Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg -
0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved
by Stretching, Straightened, and Overaged |
| 293. |
Standard:
AMS4342: Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg -
0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved,
Straightened, and Overaged |
| 294. |
Standard:
AMS4343: Aluminum Alloy, Extrusions, 7.7Zn - 2.4Mg - 1.6Cu -
0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved
by Stretching, and Overaged |
| 295. |
Standard:
AMS4344: Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved
by Stretching, Straightened, and Overaged |
| 296. |
Standard:
AMS4345: Aluminum Alloy, Extrusions, 6.4Zn - 2.4Mg - 2.2Cu -
0.12Zr (7150-T77511) Solution Heat Treated, Stress-Relieved,
Straightened, and Overaged |
| 297. |
Standard:
AMS4347: Aluminum Alloy Sheet, 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn
(6013-T4) Solution Heat Treated and Naturally Aged |
| 298. |
Standard:
AMS4348: Core, Honeycomb Aluminum Alloy, Corrosion Inhibited,
For Sandwich Construction, 5052, 350 (177) |
| 299. |
Standard:
AMS4349: Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited
For Sandwich Construction 5056, 350 (177) |
| 300. |
Standard:
AMS4590: Extrusions, Nickel-Aluminum Bronze, Martensitic, 78.5Cu
- 10.5Al - 5.1Ni - 4.8Fe, Solution Heat Treated and Tempered
(TQ50) |
| 301 |
Standard:
AMS4631: Aluminum Bronze Rods, Bars, and Forgings, 90.5Cu -
7.5Al - 1.95: Stress Relieved (NONCURRENT Jul 1989) |
| 302. |
Standard:
AMS4632: Aluminum Bronze Bars and Rods 90Cu - 8.5A1 Hard (NONCURRENT
Oct 1991) |
| 303. |
Standard:
AMS4633: Bronze, Aluminum Silicon, Rods, Bars, and Forgings
90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50) |
| 304. |
Standard:
AMS4634: Aluminum Bronze Bars, Rods, and Forgings 90.5Cu - 7.5Al
- 1.9Si Stress Relieved |
| 305. |
Standard:
AMS4635: Aluminum Bronze Bars, Rods, and Forgings, 87Cu - 9Al
- 3Fe, Stress Relieved |
| 306. |
Standard:
AMS4640: Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings
81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50)
or Temper Annealed (TQ50) |
| 307. |
Standard:
AMS4870: Aluminum Bronze, Centrifugal and Chill Castings, 85Cu
- 11A1- 3.6Fe, As Cast |
| 308. |
Standard:
AMS4871: Aluminum Bronze, Centrifugal and Chill Castings, 85Cu
- 11A1 - 3.6Fe, Solution Heat Treated and Tempered |
| 309. |
Standard:
AMS4873: Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al -
3.6Fe Solution Heat Treated and Tempered |
| 310. |
Standard:
AMS4880: Aluminum Bronze Alloy, Centrifugal and Continuous-Cast
Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench Hardened and
Temper Annealed |
| 311. |
Standard:
AMS4881: Nickel-Aluminum-Bronze, Martensitic, Sand and Centrifugal
Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper
Annealed |
| 312. |
Standard:
AMS5036: Steel Sheet and Strip, Aluminum Coated Low Carbon |
| 313. |
Standard:
AMS5047: Steel Sheet and Strip, 0.08 - 0.13C, Aluminum Killed,
Deep Forming Grade |
| 314. |
Standard:
AMS7911: Aluminum Beryllium, Preforms Hot Isostatic Pressed
38Al - 62Be |
| 315. |
Standard:
AMS7912: Aluminum-Beryllium Alloy, Extrusions 38Al - 62Be Annealed |
| 316. |
Standard:
AMS7913: Aluminum-Beryllium Alloy, Sheet and Plate 38Al - 62Be |
| 317. |
Standard:
AMSA21180: Aluminum-Alloy Castings, High Strength |
| 318. |
Standard:
AMSA22771: Aluminum Alloy Forgings, Heat Treated |
| 319. |
Standard:
AMSA81596: Aluminum Foil for Sandwich Construction |
| 320. |
Standard:
AMSC7438: Core Material, Aluminum, for Sandwich Construction |
| 321. |
Standard:
AMSQQA200/1: Aluminum Alloy 3003, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 322. |
Standard:
AMSQQA200/10: Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 323. |
Standard:
AMSQQA200/11: Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 324. |
Standard:
AMSQQA200/13: Aluminum Alloy 7178, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 325. |
Standard:
AMSQQA200/14: Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded,
7178-T76 Improved Exfoliation Resistance |
| 326. |
Standard:
AMSQQA200/15: Aluminum Alloy Bar, Rod, and Shapes, Extruded,
7075-T76 Improved Exfoliation Resistance |
| 327. |
Standard:
AMSQQA200/16: Aluminum Alloy, Structural Shapes, Extruded, 6061 |
| 328. |
Standard:
AMSQQA200/17: Aluminum Alloy 6162, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 329. |
Standard:
AMSQQA200/2: Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 330. |
Standard:
AMSQQA200/3: Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 331. |
Standard:
AMSQQA200/4: Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 332. |
Standard:
AMSQQA200/5: Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 333. |
Standard:
AMSQQA200/6: Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 334. |
Standard:
AMSQQA200/7: Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 335. |
Standard:
AMSQQA200/8: Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 336. |
Standard:
AMSQQA200/9: Aluminum Alloy 6063, Bar, Rod, Shapes, Tube, and
Wire, Extruded |
| 337. |
Standard:
AMSQQA200: Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes,
Tube, and Wire, Extruded: General Specification for |
| 338. |
Standard:
AMSQQA225/10: Aluminum Alloy 6262, Bar, Rod, and Wire- Rolled,
Drawn, or Cold Finished |
| 339. |
Standard:
AMSQQA225/1: Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn,
or Cold Finished, 1100 |
| 340. |
Standard:
AMSQQA225/2: Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn,
or Cold Finished, 3003 |
| 341. |
Standard:
AMSQQA225/3: Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn,
or Cold Finished, 2011 |
| 342. |
Standard:
AMSQQA225/4: Aluminum Alloy, 2014, Bar, Rod, Wire, and Special
Shapes, Rolled, Drawn, or Cold Finished |
| 343. |
Standard:
AMSQQA225/5: Aluminum Alloy, 2017 Bar, Rod, and Wire Rolled
Drawn, or Cold Finished |
| 344. |
Standard:
AMSQQA225/6: Aluminum Alloy, 2024 Bar, Rod, and Wire, Rolled,
Drawn, or Cold Finished |
| 345. |
Standard:
AMSQQA225/7: Aluminum Alloy 5052, Bar, Rod, and Wire- Rolled,
Drawn, or Cold Finished |
| 346. |
Standard:
AMSQQA225/8: Aluminum Alloy 6061, Bar, Rod, Wire, and Special
Shapes, Rolled, Drawn, or Cold Finished |
| 347. |
Standard:
AMSQQA225/9: Aluminum Alloy 7075, Bar, Rod, Wire, and Special
Shapes- Rolled, Drawn, or Cold Finished |
| 348. |
Standard:
AMSQQA250/1: Aluminum 1100, Plate and Sheet |
| 349. |
Standard:
AMSQQA250/10: Aluminum Alloy 5454, Plate and Sheet |
| 350. |
Standard:
AMSQQA250/11: Aluminum Alloy 6061, Plate and Sheet |
|
| 401. |
Standard:
AMS4074: Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5
Mg - 0.60 Mn - (Alclad 2024-T86) Width over 30 to 48 In., Incl.
(Cancelled Jul 1981) |
| 402. |
Standard:
AMS4075: Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5
Mg - 0.60 Mn - (Alclad 2024-T86) Width over 60 In. (Cancelled
Jul 1981) |
| 403. |
Standard:
AMS4096: Aluminum Alloy Sheet and Plate, Alclad 6.3Cu - 0.30Mn
- 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-0) Annealed |
| 404. |
Standard:
AMS4112: Aluminum Alloy, Bars, Rods, and Wire 4.4Cu 1.5Mg 0.60Mn
Rolled, Drawn, or Cold Finished (Reaffirmed, 1984) (Cancelled
Jan 96) Superseded by AMS 4339 |
| 405. |
Standard:
AMS4124: Aluminum Alloy, Rolled or Cold Finished Bars, Rods,
and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution
Heat Treated, Stress Relieved by Stretching, and Overaged |
| 406. |
Standard:
AMS4136: Aluminum Alloy, Forgings, 4.3Zn 3.3Mg 0.6Cu 0.2Mn 0.2Cr,
Solution and Precipitation Heat Treated, Low Residual Stresses
(Reaffirmed, 1991, May 95) (Cancelled Feb 96) |
| 407. |
Standard:
AMS4139: Aluminum Alloy, Forgings, 5.6Zn 2.5Mg 1.6Cu 0.25Cr
(Reaffirmed, May 95) (Cancelled Sep 96) Superseded by AMS 4126 |
| 408. |
Standard:
AMS4170: Aluminum Alloy, Impact Extrusions 5.6Zn 2.5Mg 1.6Cu
0.25Cr (75S-T6) (Cancelled Jul 81) |
| 409. |
Standard:
AMS4171: Aluminum Alloy Extrusions, 4.3Zn 3.3Mg 0.60Cu 0.20Mn
0.18Cr (Reaffirmed, 1991, May 95) (Cancelled Sep 96) |
| 410. |
Standard:
AMS4206: Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu -
2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged |
| 411. |
Standard:
AMS4211: Aluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr
(7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged |
| 412. |
Standard:
AMS4222: Aluminum Alloy Castings, Sand, Moderate Heat Resistance,
4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P) Solution Heat Treated
and Stabilized |
| 413. |
Standard:
AMS4226: Aluminum Alloy Castings, High Strength, 5.0Cu - 0.35Mn
- 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated
(Overaged) |
| 414. |
Standard:
AMS4228: Aluminum Alloy, Castings, High Strength, 4.5Cu 0.70Ag
0.30Mn 0.25Mg 0.25Ti, Solution and Precipitation Heat Treated
(Reaffirmed, 1991, May 95) (Cancelled Apr 96) |
| 415. |
Standard:
AMS4250: Aluminum Alloy, Plate 8.1Zn-2.3Mg-1.0Cu-Zr (7449-T7651)
Solution Heat Treated, Stress Relieved, and Overaged |
| 416. |
Standard:
AMS4263: Aluminum Silicon Bronze Bars, Rods, and Forgings, 90Cu
7.0Al 1.9Si, Drawn and Stress Relieved (Cancelled Jan 1993) |
| 417. |
Standard:
AMS4277: Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr
(7075-0) Annealed, Fine Grained |
| 418. |
Standard:
AMS4294: Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu
- 0.20Cr (6061-T5511) Press Heat Treated, Stress Relieved by
Stretching, Straightened, and Artificially Aged |
| 419. |
Standard:
AMS4301: Boron-Aluminum Composite Sheet - 50 V/O 5.6B, 2024-0,
For Diffusion Bonding (Reaffirmed, May 95) (Cancelled Feb 96) |
| 420. |
Standard:
AMS4338: Aluminum Alloy Extrusions (2026-T3511) 4.0Cu-1.3Mg-0.60Mn
Solution Heat Treated and Stress Relieved by Stretching |
| 421. |
Standard:
AMS7223: Rivets, Aluminum Alloy, 4.5Cu 1.5Mg 0.6Mn (Reaffirmed,
1992) (Cancelled Sep 96) |
| 422. |
Standard:
AMS7294: Labels, Aluminum Foil Etched and Enameled (Reaffirmed,
1992) (Cancelled Sep 96) |
| 423. |
Standard:
AMSQQA367: Aluminum Alloy Forgings |
| 424. |
Standard:
AMSQQA591: Aluminum Alloy Die Castings |
| 425. |
Standard:
AMSSTD184: Identification Marking of Aluminum, Magnesium, and
Titanium |
| 426. |
Standard:
AMST7081: Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061,
Aircraft Hydraulic Quality |
| 427. |
Standard:
AMSWWT700/1: Tube, Aluminum, Drawn, Seamless, 1100 |
| 428. |
Standard:
AMSWWT700/2: Tube, Aluminum, Alloym, Drawn, Seamless, 3003 |
| 429. |
Standard:
AMSWWT700/3: Tube, Aluminum Alloy, Drawn, Seamless, 2024 |
| 430. |
Standard:
AMSWWT700/4: Tube, Aluminum Alloy, Drawn, Seamless, 5052 |
| 431. |
Standard:
AMSWWT700/5: Tube, Aluminum Alloy, Drawn Seamless, 5086 |
| 432. |
Standard:
AMSWWT700/6: Tube, Aluminum Alloy, Drawn, Seamless, 6061 |
| 433. |
Standard:
AMSWWT700/7: Tube, Aluminum Alloy Drawn, Seamless, 7075 |
| 434. |
Standard:
AS125251: Rivet - 100° Countersunk Head, Aluminum Alloy |
| 435. |
Standard:
AS125701: Rivet - Universal Head, Aluminum Alloy |
| 436. |
Standard:
AS3121: Plug, Expansion - Aluminum, 2024-T4, Long- Std and .010
Oversize Diameters |
| 437. |
Standard:
AS3122: Pin, Expansion - Aluminum, 2024-T4, Long |
| 438. |
Standard:
AS3123: Plug, Expansion - Aluminum, 2024-T4, Short- Std and
.010 Oversize Diameters |
| 439. |
Standard:
AS3124: Pin, Expansion - Aluminum, 2024-T4, Short |
| 440. |
Standard:
AS3220: Sleeve, Flared, Tube Fitting - Aluminum |
| 441. |
Standard:
AS6136: Conduit, Electrical, Flexible, Shielded, Aluminum Alloy
for Aircraft Installations |
| 442. |
Standard:
AS90: Propeller Blades Aluminum Alloy, Shank Dimensions for |
| 443. |
Standard:
EN2044: Round aluminum alloy bars--Drawn--Dimensions--Tolerance
h 11--Aerospace series |
| 444. |
Standard:
EN2045: Square aluminum alloy bars--Drawn--Dimensions--Tolerance
h 11--Aerospace series |
| 445. |
Standard:
EN2046: Hexagonal aluminum alloy bars--Drawn--Dimensions--Tolerance
h |
| 446. |
Standard:
EN2047: Beaded L-section aluminum alloy extrusions--Dimensions--Aerospace
series |
| 447. |
Standard:
EN2048: L-section aluminum alloy extrusions--Dimensions--Aerospace
series |
| 448. |
Standard:
EN2049: Channel section aluminum alloy extrusions--Dimensions--Aerospace
series |
| 449. |
Standard:
EN2050: T-section aluminum alloy extrusions--Dimensions--Aerospace
series |
| 450. |
Standard:
J1756: Test Procedure to Determine the Fogging Characteristics
of interior automotive Materials |
| 451. |
Standard:
J399: Anodized Aluminum Automotive Parts |
| 452. |
Standard:
J469: Zinc Die Casting Alloys |
| 453. |
Standard:
MA2152/1: Clamp, Center Mount, Bare Metal, Aluminum, Metric |
| 454. |
Standard:
MA2153/1: Clamp, Loop Type, Bare Metal, Aluminum, Metric |
| 455. |
Standard:
MA2155/1: Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon
Fluid Resistant, Aluminum, Metric |
| 456. |
Standard:
MA2155/3: Clamp, Rectangular Loop, Cushioned, with Wedge, Phosphate
Ester Fluid Resistant, Aluminum, Metric |
| 457. |
Standard:
AIR1388: Service Damage Limits for Aircraft Hydraulic Tubing |
| 458. |
Standard:
AIR1529: Flexure Testing of Hydraulic Tubing Joints and Fittings
by Planar Resonant Vibration (Free-Free Beam) |
| 459. |
Standard:
AIR46: The Preparation and Use of Chromel-Alumel Thermocouples
for Aircraft Gas Turbine Engines |
| 460. |
Standard:
AIR4789: Aerospace Information Report on Evaluating Corrosion
Testing of Electrical Connectors and Accessories for the Purpose
of Qualification |
| 461. |
Standard:
AIR811: Disposition of Wheels Which Have Been Overheated |
| 462. |
Standard:
AMS3696: Aerodynamic Fairing Compound, -55 to +85 deg C (-65
to +185 deg F) (Noncurrent, Jul 91) |
| 463. |
Standard:
AMS3697: Aerodynamic Fairing Compound, -55 to +150 deg C (-65
to +300 deg F) (Noncurrent, Jul 91) |
| 464. |
Standard:
AMS3883: Glass Sheet, Barium Aluminum Borosilicate For Electronicapplications
(Cancelled Nov 1971) |
| 465. |
Standard:
AMS4187: Bars, and Rods, Rolled, Drawn, or Cold Finished 5.6Zn
- 2.5Mg - 1.6Cu - 0.23Cr, Annealed |
| 466. |
Standard:
AMS4231: Castings, Sand, 4.5Cu - 1.1Si, Solution and Precipitation
Heat Treated |
| 467. |
Standard:
AMS4240: Castings, Sand, 10Mg, Solution Heat Treated and Naturally
Aged |
| 468. |
Standard:
AMS4275: Castings, Permanent Mold, 6.2Sn - 1Cu - 1Ni, Stress
Relieved |
| 469. |
Standard:
AMS4993: Titanium Alloy, Blended Powder Compacts, Sintered,
6A1 - 4V |
| 470. |
Standard:
AMS5792: Powder, Plasma Spray 50(88W - 12Co) + 35(70Ni - 16.5Cr
- 4Fe - 4Si - 3.8B) + 15(80Ni - 20Al) Three-Component Mixture |
| 471. |
Standard:
AMS5793: Powder, Plasma Spray 9Ni - 5Al |
| 472. |
Standard:
AMSDTL22499/1: Shim Stock, Laminated, Aluminum Alloy |
| 473. |
Standard:
AMSS6709: Steel, Chrome-Molybdenum-Aluminum- Bars, Rods, Billets
and Forging Stock (For Nitriding) (Aircraft Quality) |
| 474. |
Standard:
AMSW6858: Welding, Resistance: Spot and Seam |
| 475. |
Standard:
ARP1331: The Chemical Milling Process |
| 476. |
Standard:
ARP1925: Automated Brush Deburring |
| 477. |
Standard:
ARP1928: Torque Recommendations for Attaching Electrical Wiring
Devices to Terminal Boards or Blocks, Studs, Posts, Etc. |
| 478. |
Standard:
ARP908: Torque Requirements, Installation and Qualification
Test, Hose and Tube Fitting (Cancelled Nov 1988) |
| 479. |
Standard:
ARP908: Torque Requirements, Installation and Qualification
Test, Hose and Tube Fitting |
| 480. |
Standard:
ARP982: Minimizing Stress-Corrosion Cracking in Wrought Titanium
Alloy Products |
| 481. |
Standard:
AS123020: Gasket-Aluminum-Non Asbestos, Annular |
| 482. |
Standard:
AS25435: Terminal-Lug, Crimp Style, Straight Type, For Aluminum
Aircraft Wire, Class 1 |
| 483. |
Standard:
AS25436: Terminal-Lug, Crimp Style, 90? Upright Type, For Aluminum
Aircraft Wire, Class 1 |
| 484. |
Standard:
AS25439: Splice-Permanent Crimp Style, 2 Way Type For Aluminum
Aircraft Wire, Class 1 |
| 485. |
Standard:
AS269: Identification of Material for AN, MS, and AS Engine
and Propeller Standard Utility Parts and Also for Company Parts |
| 486. |
Standard:
AS4467: Standardization, Hydraulic Tube Walls |
| 487. |
Standard:
AS4700: Short Flareless Fittings, Installation Procedures and
Torque for |
| 488. |
Standard:
AS90991: Nut-Hex, Boss Connection, Aluminum |
| 489. |
Standard:
AS92001: Nut, Plain, Hex, Boss Connection, Aluminum |
| 490. |
Standard:
AS9353: Clamp, Loop-Aluminum, .204 Hole |
| 491. |
Standard:
AS9354: Clamp, Loop-Aluminum, .265 Hole |
| 492. |
Standard:
ISO1965: Aluminium terminal ends for crimping to aircraft aluminium
electrical cables |
| 493. |
Standard:
ISO7257: Hydraulic tubing joints and fittings--Rotary flexure
test |
| 494. |
Standard:
ISO8056/1: Nickel-chromium and nickel-aluminium thermocouple
extension cables--Part 1: Conductors--General requirements and
tests |
| 495. |
Standard:
ISO8056/2: Nickel-chromium and nickel-aluminium thermocouple
extension cables--Part 2: Terminations--General requirements
and tests |
| 496. |
Standard:
ISO8056/3: Nickel-chromium and nickel-aluminium thermocouple
extension cables--Part 3: Crimp-type ring terminal ends--Dimensions |
| 497. |
Standard:
ISO8056/4: Nickel-chromium and nickel-aluminium thermocouple
extension cables--Part 4: Crimp-type butt connectors--Dimensions |
| 498. |
Standard:
ISO8076: Aerospace process--Anodic treatment of aluminium alloys--Chromic
acid process 40 V DC, undyed coating |
| 499. |
Standard:
ISO8077: Aerospace process--Anodic treatment of aluminium alloys--Chromic
acid process 20 V DC, undyed coating |
| 500. |
Standard:
ISO8078: Aerospace process--Anodic treatment of aluminium alloys--Sulfuric
acid process, undyed coating |
|
