B857-01 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
B779-96 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
B736-00 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
B547/B547M-00 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B491/B491M-00 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B483/B483M-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
B429-00 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B345/B345M-00 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B317-00 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor)
B316/B316M-00 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B313/B313M-00 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B308/B308M-00 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B247-00 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B247M-00 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
B241/B241M-00 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B234-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B234M-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
B221-00 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B221M-00 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
B211-00 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
B211M-95a Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
B210-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B210M-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
B209-01 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M-01 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
C1431-99 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
B856-01 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
B711-99 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
B686-99 Standard Specification for Aluminum Alloy Castings, High-Strength
B632/B632M-01 Standard Specification for Aluminum-Alloy Rolled Tread Plate
B618-01 Standard Specification for Aluminum-Alloy Investment Castings
B479-00 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
B404/B404M-00 Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
B401-99 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B361-95 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B236-00 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B236M-00 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
B232/B232M-01 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B179-96 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B26/B26M-01 Standard Specification for Aluminum-Alloy Sand Castings
B549-00 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
B108-99 Standard Specification for Aluminum-Alloy Permanent Mold Castings
B85-99 Standard Specification for Aluminum-Alloy Die Castings
B37-96(2001) Standard Specification for Aluminum for Use in Iron and Steel Manufacture
R0068- Alloy and Temper Designation Systems for Aluminum [Metric] (This is not an ASTM standard; available as PDF, only)
R0067- Alloy and Temper Designation Systems for Aluminum (This is not an ASTM standard; available as PDF, only)
F1845-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
E227-90(1996) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique
B786-00 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum 1350 Conductors for Subsequent Insulation
B745/B745M-97 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B701/B701M-00 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
B524/B524M-99 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B373-00 Standard Specification for Aluminum Foil for Capacitors
B253-87(1999)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
F901-97 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
E753-80(1999) Standard Specification for Municipal Aluminum Scrap (MAS)
E716-94(1998) Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
E607-90(1996) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
B901-00 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
B746/B746M-95(2000) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B609/B609M-99 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B580-79(2000) Standard Specification for Anodic Oxide Coatings on Aluminum
B531-90(1998)e1 Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes
B500/B500M-98 Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
B233-97 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B231/B231M-99 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B150M-95a Standard Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric]
F626-96a Standard Specification for Fence Fittings
E1251-94(1999) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
E505-96 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
B836-00 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B744/B744M-99 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B666/B666M-01 Standard Practice for Identification Marking of Aluminum and Magnesium Products
B400-01 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B399/B399M-99 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B230/B230M-99 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
B803-98 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B790/B790M-00 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B778-97 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
B502-98 Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
B449-93(1998) Standard Specification for Chromates on Aluminum
B324-01 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B265-99 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
G110-92(1997) Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
F1548-94 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
F468-01 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
F468M-01 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
D480-88(1999) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
B863-99a Standard Specification for Titanium and Titanium Alloy Wire
B862-99 Standard Specification for Titanium and Titanium Alloy Welded Pipe
B801-99 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B597-92(1998) Standard Practice for Heat Treatment of Aluminum Alloys
B348-00 Standard Specification for Titanium and Titanium Alloy Bars and Billets
B327-01 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B136-84(1998) Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
A875/A875M-01 Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
E1648-95(2001) Standard Reference Radiographs for Examination of Aluminum Fusion Welds
E34-94(1998) Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
D1730-67(1998) Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D718-86(1999) Standard Test Methods for Analysis of Aluminum Silicate Pigment
B871-96 Standard Test Method for Tear Testing of Aluminum Alloy Products
B864/B864M-00 Standard Specification for Corrugated Aluminum Box Culverts
B807-95 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B565-94(2000) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B557-94 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B416-98 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B381-00 Standard Specification for Titanium and Titanium Alloy Forgings
B169-95 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B137-95(2000) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
E1637-98 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
D962-81(1999) Standard Specification for Aluminum Powder and Paste Pigments for Paints
B861-00 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
B831-93(1998) Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
B802/B802M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B680-80(2000) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B397-85(1999) Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors
B396-00 Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes
A924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel
F1665-01 Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1428-92(1999) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
F1281-01a Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F584-87(1999) Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
E1826-00 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E874-01 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E866-00 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E865-99e1 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E155-00 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
E127-98 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
D2649-99e1 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
D930-89(1996)e1 Standard Test Method of Total Immersion Corrosion Test of Water-Soluble Aluminum Cleaners
C809-94(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
C784-93e1 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
B875-96 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
B769-94(2000) Standard Test Method for Shear Testing of Aluminum Alloys
B660-96 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B566-93(1998)e1 Standard Specification for Copper-Clad Aluminum Wire
B557M-94 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
B457-67(1998) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B415-98 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B403-96 Standard Specification for Magnesium-Alloy Investment Castings
B398/B398M-99 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B341/B341M-00 Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
A463/A463M-01 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
G139-96 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
G112-92(1997) Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
G34-99 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
F1974-01 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1664-01 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence
F1335-98 Standard Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service
F1282-01a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1183-96 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F668-99a Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
E1091-98 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E272-99 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
D5184-01 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
D3619-77(1996)e1 Standard Specification for Aluminum Silicate Pigments (Anhydrous)
D1394-76(1999) Standard Test Methods for Chemical Analysis of White Titanium Pigments
D857-95 Standard Test Method for Aluminum in Water
D603-66(1996)e1 Standard Specification for Aluminum Silicate Pigments (Hydrous)
C1031-97 Standard Specification for Nuclear-Grade Aluminum Oxide Powder
C785-93e1 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
C703-72(1999) Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
B909-00 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
B889-98 Standard Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes
B588-88(1994) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
B240-01 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B169/B169M-01 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
A856/A856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A491-96 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
G47-98 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
F1987-00a Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
F1986-00a Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
F1617-98 Standard Test Method for Measuring Surface Sodium, Aluminum, and Potassium on Silicon and EPI Substrates by Secondary Ion Mass Spectrometry
F1593-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
F1370-92 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
F1345-96 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F603-00 Standard Specification for High-Purity Dense Aluminum Oxide for Surgical Implant Application
E1801-00 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1435-98 Standard Practice for Handling Densified Articles of Aluminum Oxide Reinforced with Silicon Carbide Whiskers
E956-83(1999) Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
E864-98 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
D4340-96 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
D3762-98 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
D2824-94 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, and Fibered without Asbestos
D2674-72(1998) Standard Test Methods for Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
D1731-67(1998) Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
B812-96 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
B789/B789M-99 Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
B788/B788M-00 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B767-88(1994) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B647-84(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B646-97 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B645-98 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B606-98 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B592-98 Standard Specification for Copper-Zinc-Aluminum-Cobalt Plate, Sheet, Strip, and Rolled Bar
B548-90(1997) Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B422-99 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B275-96 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B258-96 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B171/B171M-99e1 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B150-98e2 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B86-98e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
A855/A855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A585-97 Standard Specification for Aluminum-Coated Steel Barbed Wire
A474-98 Standard Specification for Aluminum-Coated Steel Wire Strand
F467-01 Standard Specification for Nonferrous Nuts for General Use
E262-97 Standard Method for Determining Thermal Neutron Reaction and Fluence Rates by Radioactivation Techniques
B283-99a Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B80-01 Standard Specification for Magnesium-Alloy Sand Castings
A817-00 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
G66-99 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
F1718-99 Standard Specification for Rotary Positive Displacement Fuel Pumps
F1333-91(1996)e1 Standard Specification for Construction of Fire and Foam Station Cabinets
F1068-90(1998)e1 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
F467M-01 Standard Specification for Nonferrous Nuts for General Use [Metric]
F459-84(2001) Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
E1978-01 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1977-01 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1976-01 Standard Specification for Shelter, Tactical, Nonexpandable
E1652-00 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
E1473-94a(1998) Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
E738-00 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
E350-95(2000)e1 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E266-92(1996) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
E215-98 Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube
D6492-99 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
D6354-98 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
D6353-98 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
D5502-00 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
D4956-01 Standard Specification for Retroreflective Sheeting for Traffic Control
D3933-98 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D2943-96(2000) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
D2651-90(1995) Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
B894-99e1 Standard Specification for Zinc-Copper-Aluminum Alloy Die Castings
B868-96 Standard Practice for Contact Performance Classification of Electrical Connection Systems
B750-99e1 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy in Ingot Form for Hot-Dip Coatings
B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
B603-90(2001) Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B595-95(2000)e1 Standard Specification for Sintered Aluminum Structural Parts
B594-97 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
B498/B498M-98 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B368-97 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B279-98 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
A925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A854/A854M-98 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
G67-99 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
G64-99 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
E1975-01e1 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1800-00 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
E1793-00 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1555-98 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E536-98 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E353-93(2000)e1 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
D2201-99 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
B694-95 Standard Specification for Copper, Copper-Alloy, and Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B395-95 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B395M-95 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric]
B359M-95 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric]
B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B111M-98e1 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric]
A760/A760M-01 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A584-97 Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric
D3805-97 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
F1594-95(1999) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
F1553-96 Standard Guide for Specifying Chain Link Fence
F1513-99 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
F1043-00 Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework
F782-95 Standard Specification for Doors, Furniture, Marine
F638-88(2001) Standard Specification for Fine Aluminum-1% Magnesium Wire for Semiconductor Lead-Bonding
F487-88(2001) Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding
E1749-00 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1724-95(2001) Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
E1277-96 Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
E990-98 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E507-98 Standard Test Method for Aluminum in Iron Ores by Atomic Absorption Spectrometry
D6511-00 Standard Test Methods for Solvent Bearing Bituminous Compounds
D6356-98 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
D6208-97 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
D3322-82(2001) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
D3260-01 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
D2809-94(1999) Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
D2510-94(1998) Standard Test Method for Adhesion of Solid Film Lubricants
B908-00 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B907-01 Standard Specification for Zinc, Tin and Cadmium Base Solders
B892-01 Standard Specification for Zinc - Copper - Aluminum in Ingot Form for Die Castings
B872-96 Standard Specification for Precipitation-Hardening Nickel-Iron-Chromium- Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip
B659-90(1997) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B248-98 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M-96 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip and Rolled Bar [Metric]
B107/B107M-00 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B94-94(2000) Standard Specification for Magnesium-Alloy Die Castings
B90/B90M-98 Standard Specification for Magnesium-Alloy Sheet and Plate
B78-90(2001) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
A1002-99 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A792/A792M-01 Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A787-01 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A276-00a Standard Specification for Stainless Steel Bars and Shapes
B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Discontinued 1998) , Replaced By B802/B802M
B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) [Metric] (Discontinued 1999) , Replaced By B524/B524M
B341M Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) [Metric] (Discontinued 1998) , Replaced By B341/B341M
R0071- Standard Method for Exfoliation Corrosion Susceptibility in 7XXX Series Copper-Containing Aluminum Alloys (Exco Test) (This is not an approved ASTM standard; available as PDF, only)
G100-89(1999) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
G44-99 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
F1099M-98 Standard Specification for Rat Guards, Ship's (Metric)
F981-99 Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
F620-00 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
F7-95(2000) Standard Specification for Aluminum Oxide Powder
E1974-01 Standard Specification for Shelter, Electrical, Equipment S-250/G
E1794-00 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200oF Elevated Humidity Service), Type II Panels
E602-91(1997) Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
E428-00 Standard Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Examination
E354-93(2000)e1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
D6559-00a Standard Test Method for Determination of TGA Air Reactivity of Baked Carbon Anodes and Cathode Blocks
D6558-00a Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
D4503-86(1998) Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
D3974-81(1999) Standard Practices for Extraction of Trace Elements from Sediments
D2249-01 Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash
D1676-99 Standard Test Methods for Film-Insulated Magnet Wire
C1054-85(1995) Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
B865-96a Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
B830-97 Standard Specification for Uniform Test Methods and Frequency
B148-97e1 Standard Specification for Aluminum-Bronze Sand Castings
A764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
F2049-00 Standard Guide for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
F2000-00a Standard Guide for Fences for Ballfields and Other Sports Facilities
F1916-98 Standard Specification for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications
F1908-98 Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F1712-96a Standard Specification for Steel Chain-Link Fencing Materials Used in Detention and Correctional Facilities
F1433-97 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
F1369-93a Standard Specification for Heaters, Convection, Steam and Hot Water
F1360-93(1999) Standard Specification for Ovens, Microwave, Electric
F1295-97a Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1217-92(1997) Standard Specification for Cooker, Steam
F1077-95a Standard Guide for Selection of Committee F-16 Fastener Specifications
F993-86(1996)e1 Standard Specification for Valve Locking Devices
F992-86(1996)e1 Standard Specification for Valve Label Plates
F537-93 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
F136-98e1 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNS R56401) for Surgical Implant Applications
E1997-99 Standard Practice for the Selection of Spacecraft Materials
E1730-99 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1592-01 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1514-98 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1316-00a Standard Terminology for Nondestructive Examinations
E885-88(1996) Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
E784-89(2000)e1 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
E478-89a(1996) Standard Test Methods for Chemical Analysis of Copper Alloys
E120-00 Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys
E107-88(1998) Standard Test Methods for Chemical Analysis of Electronic Nickel
E76-88(1998) Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys
E35-88(1997) Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys
D6577-00a Standard Guide for Testing Industrial Protective Coatings
D6472-00 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
D6471-99 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
D6465-99 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
D4712-87a(2001) Standard Guide for Testing Industrial Water-Reducible Coatings
D3451-01 Standard Guide for Testing Coating Powders and Powder Coatings
D3361-93 Standard Practice for Operating Light- and Water-Exposure Apparatus (Unfiltered Open-Flame Carbon-Arc Type) for Testing Paint, Varnish, Lacquer, and Related Products Using the Dew Cycle
D3276-00 Standard Guide for Painting Inspectors (Metal Substrates)
D3165-00 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
D3115-95(2000) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
D2454-95 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
C25-99 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
B911/B911M-00 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B338-99 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B199-99 Standard Specification for Magnesium-Alloy Permanent Mold Castings
B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
B111-98e1 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B91-97 Standard Specification for Magnesium-Alloy Forgings
A975-97 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A974-97 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A755/A755M-99 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
A116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
G103-97 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
F1110-90(1998) Standard Test Method for Sandwich Corrosion Test
F1108-97a Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406)
F955-96 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
F510-93(1999) Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
E1835-96 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E365-99 Standard Test Methods for the Determination of Vanadium in Ferrovanadium and Vanadium Alloying Additives
E54-80(1996) Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes
D5198-92(1997) Standard Practice for Nitric Acid Digestion of Solid Waste
D5056-96 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
D2832-92(1999) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
D1280-00 Standard Test Method for Total Immersion Corrosion Test for Soak Tank Metal Cleaners
B380-97 Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
R0070- American National Standard Dimensional Tolerances for Aluminum Mill Products [Metric] (This is not an ASTM standard; available as PDF, only)
R0069- American National Standard Dimensional Tolerances for Aluminum Mill Products (This is not an ASTM standard; available as PDF, only)
G134-95(2001)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
G116-99 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
G82-98 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
G32-98 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
F1580-95e1 Standard Specification for Titanium and Titanium-6% Aluminum-4% Vanadium Alloy Powders for Coatings of Surgical Implants
F1508-96 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
F1389-00 Standard Test Methods for Photoluminescence Analysis of Single Crystal Silicon for III-V Impurities
F1348/F1348M-91(1997) Standard Specification for Pneumatic Rotary Descaling Machines
F1178-88(1994)e1 Standard Specification for Enameling System, Baking, Metal Joiner Work and Furniture
F1070-87(1999) Standard Specification for Doors, Non-Tight, for Marine Use
F969-01 Standard Practice for Construction of Chain-Link Tennis Court Fence
F917-91(1998) Standard Specification for Commercial Food Waste Disposers
F763-99 Standard Practice for Short-Term Screening of Implant Materials
F683-00 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
F640-79(2000) Standard Test Methods for Radiopacity of Plastics for Medical Use
F543-01e1 Standard Specification and Test Methods for Metallic Medical Bone Screws
E1282-98 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
E1030-00 Standard Test Method for Radiographic Examination of Metallic Castings
E1004-99 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
E936-98 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E543-99 Standard Practice for Agencies Performing Nondestructive Testing
E481-97 Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver
E415-99a Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
E360-96(2001) Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon
E317-01 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments
E181-98 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
E164-97 Standard Practice for Ultrasonic Contact Examination of Weldments
E140-97e3 Standard Hardness Conversion Tables for Metals (Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Rockwell Superficial Hardness, Knoop Hardness, and Scleroscope Hardness)
D6361-98 Standard Guide for Selecting Cleaning Agents and Processes
D6297-98 Standard Specification for Asphaltic Plug Joints for Bridges
D6255/D6255M-99 Standard Specification for Steel or Aluminum Slotted Angle Crates
D5767-95(1999) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
D5752-98 Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
D5363-97 Standard Specification for Anaerobic Single-Component Adhesives (AN)
D5179-98 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
D5031-96 Standard Practice for Conducting Tests on Paints and Related Coatings and Materials Using Enclosed Carbon-Arc Exposure Apparatus
D4742-96 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
D4585-99 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4139-82(1999) Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
D3528-96 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
D3433-99 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
D3359-97 Standard Test Methods for Measuring Adhesion by Tape Test
D3306-01 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
D3167-97 Standard Test Method for Floating Roller Peel Resistance of Adhesives
D2918-99 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
D2803-93 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D2795-95 Standard Test Methods for Analysis of Coal and Coke Ash
D2557-98 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)
D2519-96 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
D2248-01a Standard Practice for Detergent Resistance of Organic Finishes
D2247-99 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
D1876-00e1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
D1781-98 Standard Test Method for Climbing Drum Peel for Adhesives
D1735-99 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D1669-89(1994)e1 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
D1654-92(2000) Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1400-00 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
D1062-96e1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
D950-98 Standard Test Method for Impact Strength of Adhesive Bonds
D870-97 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
D822-96 Standard Practice for Conducting Tests on Paint and Related Coatings and Materials Using Filtered Open-Flame Carbon-Arc Exposure Apparatus
C1423-98 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1367-01 Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
C992-89(1997) Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C921-89(1996) Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C599-91(1995)e1 Standard Specification for Conical Process Glass Pipe and Fittings
B914-00 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B860-01 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B852-01 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
B766-86(1998) Standard Specification for Electrodeposited Coatings of Cadmium
B608-95 Standard Specification for Welded Copper-Alloy Pipe
B359-98 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B315-99 Standard Specification for Seamless Copper Alloy Pipe and Tube
A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A742/A742M-98 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A683/A683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A677/A677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
E1339 Guide for Identification of Aluminum Alloys and Parts in Computerized Material Property Databases (Discontinued 1997) , Replaced By No_Replacement
E421 Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron (Discontinued 1997) , Replaced By No_Replacement
E293 Standard Test Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique (Discontinued 1997) , Replaced By No_Replacement
B791 Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Discontinued 1999) , Replaced By No_Replacement
B681 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope (Discontinued 2001) , Replaced By No_Replacement
B669 Specification for Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings (Discontinued 1999) , Replaced By No_Replacement
B632M Discontinued 1993 Replaced by B 632/B62M
B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes [Metric] (Discontinued 1999) , Replaced By B609/B609M
B500M Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Discontinued 1998) , Replaced By B500/B500M
B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Discontinued 1998) , Replaced By B498/B498M
B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors [Metric] (Discontinued 1999) , Replaced By B399/B399M
B398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes [Metric] (Discontinued 1999) , Replaced By B398/B398M
B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel-Reinforced (ACSR) [Metric] (Discontinued 1999) , Replaced By B232/B232M
B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors [Metric] (Discontinued 1999) , Replaced By B231/B231M
B230M Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes [Metric] (Discontinued 1999) , Replaced By B230/B230M
B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar [Metric] (Discontinued 2001) , Replaced By B169/B169M
A410 Discontinued 1976: Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Copper-Nickel-Aluminum
R0013- Statistical Aspects of Mechanical Property Assurance (This is not an ASTM standard; available as PDF, only)
G145-96 Standard Guide for Studying Fire Incidents in Oxygen Systems
G129-00 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
G111-97 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
G107-95 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
G102-89(1999) Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
G84-89(1999)e1 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
G37-98 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
G33-99 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
G4-95 Standard Guide for Conducting Corrosion Coupon Tests in Field Applications
F2027-00e1 Standard Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products
F1724-01 Standard Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy
F1723-96 Standard Practice for Evaluation of Polycrystalline Silicon Rods by Float-Zone Crystal Growth and Spectroscopy
F1714-96 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices
F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F1708-96 Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies
F1672-95(2000) Standard Specification for Resurfacing Patellar Prosthesis
F1636-95e2 Standard Specification for Bores and Cones for Modular Femoral Heads
F1630-00 Standard Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities
F1541-01 Standard Specification and Test Methods for External Skeletal Fixation Devices
F1512-94(1999) Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
F1510-98 Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use
F1476-95a Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
F1472-00 Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications
F1387-99 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
F1378-00 Standard Specification for Shoulder Prosthesis
F1376-92(1999) Standard Guide for Metallurgical Analysis for Gas Distribution System Components
F1357-99 Standard Specification for Articulating Total Wrist Implants
F1261M-96 Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
F1182-90(1996) Standard Specification for Anodes, Sacrificial Zinc Alloy
F1135-99 Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
F1069-87(1999) Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
F998-00 Standard Specification for Centrifugal Pump, Shipboard Use
F985-00 Standard Specification for Panama Canal Pilot Platform
F680-80(1993) Standard Test Methods for Nails
F502-93(1998) Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F485-98 Standard Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces
F458-84(2001) Standard Practice for Nondestructive Pull Testing of Wire Bonds
F384-00 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
F382-99 Standard Specification and Test Method for Metallic Bone Plates
F138-00 Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F67-00 Standard Specification for Unalloyed Titanium for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
E2099-00 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2005-99 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
E1925-01 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1901-97 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods
E1774-96 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
E1761-95(1999) Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals
E1647-98a Standard Practice for Determining Contrast Sensitivity in Radioscopy
E1576-99 Standard Guide for Medical Surveillance Program for Workers with Occupational Exposure to Respirable Silicon Carbide Whiskers
E1556-98 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1437-98 Standard Practice for Handling Silicon Carbide Whiskers
E1379-90(1999)e1 Standard Specification for Laboratory Glass Dewar Flask
E1195-87(1993)e1 Standard Test Method for Determining a Sorption Constant (Koc) for an Organic Chemical in Soil and Sediments
E1158-98 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material
E1137-97 Standard Specification for Industrial Platinum Resistance Thermometers
E1031-96 Standard Test Method for Analysis of Iron-Making and Steel-Making Slags by X-Ray Spectrometry
E1025-98 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
E1019-00 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
E1005-97 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
E1001-99a Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
E1000-98 Standard Guide for Radioscopy
E944-96 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, (IIA)
E798-96 Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
E749-96 Standard Practice for Acoustic Emission Monitoring During Continuous Welding
E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
E721-94 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
E720-94 Standard Guide for Selection and Use of Neutron-Activation Foils for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
E604-83(1994) Standard Test Method for Dynamic Tear Testing of Metallic Materials
E585/E585M-99 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
E561-98 Standard Practice for R-Curve Determination
E539-90(1996)E1 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy
E527-83(1997)e1 Standard Practice for Numbering Metals and Alloys (UNS)
E496-96 Standard Test Method for Measuring Neutron Fluence Rate and Average Energy From Neutron Generators by Radioactivation Techniques
E439-98 Standard Test Methods for Chemical Analysis of Beryllium
E402-95 Standard Test Method for Spectrographic Analysis of Uranium Oxide (U3O8)by Gallium Oxide-Carrier Technique
E376-96 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods
E372-01 Standard Test Method Determination of Calcium and Magnesium Ferrosilicon
E371-00 Standard Test Method for the Determination of Boron in Ferroboron
E367-83(1997)e1 Standard Methods for Chemical Analysis of Ferrocolumbium
E364-94(2000) Standard Test Methods for Chemical Analysis of Ferrochrome-Silicon
E352-93(2000)e1 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E351-93(2000)e1 Standard Test Methods for Chemical Analysis of Cast Iron--All Types
E267-90(1995) Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances
E261-98 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
E252-84(1999) Standard Test Method for Thickness of Thin Foil and Film by Weighing
E235-88(1996)e1 Standard Specification for Thermocouples, Sheathed, Type K, for Nuclear or for Other High-Reliability Applications
E214-01 Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves
E159-00 Standard Test Method for Hydrogen Loss of Cobalt, Copper, Tungsten, and Iron Powders
E62-89(1996) Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E9-89a(2000) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E8M-00b Standard Test Methods for Tension Testing of Metallic Materials [Metric]
D6376-99 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
D6368-00 Standard Specification for Vapor-Degreasing Grade and General Grade normal-Propyl Bromide
D6279-99e1 Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
D6120-97 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
D6019-96 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
D5977-96 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
D5814-95 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
D5800-00a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
D5796-99 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
D5673-96 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
D5600-98 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
D5394-97 Standard Specification for Reclaimed 1,1,1-Trichloroethane
D5212-91(1997) Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures
D5185-97 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5105-94(1999) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
D5091-95 Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
D5066-91(2001) Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
D4985-00a Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
D4636-99 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
D4541-95e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4309-96 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
D4195-88(1998)e1 Standard Guide for Water Analysis for Reverse Osmosis Application
D4126-00 Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
D3943-00 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
D3916-94 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
D3898-93(1998) Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
D3802-79(1999) Standard Test Method for Ball-Pan Hardness of Activated Carbon
D3794-00 Standard Guide for Testing Coil Coatings
D3682-00 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
D3360-96 Standard Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments
D3170-87(1996)e1 Standard Test Method for Chipping Resistance of Coatings
D3145-97 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
D2847-99 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
D2570-96 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
D2500-99 Standard Test Method for Cloud Point of Petroleum Products
D2376-00 Standard Test Method for Slump of Face Glazing and Bedding Compounds on Metal Sash
D2251-96(2000) Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
D1995-92(1998)e1 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
D1971-95 Standard Practices for Digestion of Samples for Determination of Metals by Flame Atomic Absorption or Plasma Emission Spectroscopy
D1641-97 Standard Practice for Conducting Outdoor Exposure Tests of Varnishes
D1199-86(1999) Standard Specification for Calcium Carbonate Pigments
D976-91(2000)e1 Standard Test Methods for Calculated Cetane Index of Distillate Fuels
D717-86(1999) Standard Test Methods for Analysis of Magnesium Silicate Pigment
D482-00a Standard Test Method for Ash from Petroleum Products
D333-01 Standard Guide for Clear and Pigmented Lacquers
D267-82(1999) Standard Specification for Gold Bronze Powder
D130-94(2000)e1 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
D129-00 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
D86-00a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D34-91(1999) Standard Guide for Chemical Analysis of White Pigments
C1454-00 Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel
C1401-98 Standard Guide for Structural Sealant Glazing
C1375-00 Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1347-96a Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1313-00 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1233-98 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1216-92(1997) Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1201-91(1996) Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1187-91(1999) Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C1158-97 Standard Practice for Use and Installation of Radiant Barrier Systems (RBS) in Building Construction
C1063-99 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1062-00 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
C1047-99 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C560-88(1998) Standard Test Methods for Chemical Analysis of Graphite
C410-60(1997) Standard Specification for Industrial Floor Brick
C323-56(1999) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C311-00 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
C114-00 Standard Test Methods for Chemical Analysis of Hydraulic Cement
B906-00 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B904-00 Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
B893-98 Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B876-96 Standard Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application
B824-96 Standard Specification for General Requirements for Copper Alloy Castings
B661-99 Standard Practice for Heat Treatment of Magnesium Alloys
B633-98 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B584-00 Standard Specification for Copper Alloy Sand Castings for General Applications
B545-97e1 Standard Specification for Electrodeposited Coatings of Tin
B543-96 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B501-99 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B488-95 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
B456-95 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B446-00e1 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Rod and Bar
B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B249/B249M-00 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B124/B124M-00 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B48-00 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B30-00 Standard Specification for Copper Alloys in Ingot Form
A1007-00 Standard Specification for Carbon Steel Wire for Wire Rope
A1001-99 Standard Specification for High Strength Steel Castings in Heavy Sections
A880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys
A840/A840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel
A729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A531/A531M-91(1996) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A455/A455M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A100-93(2000) Standard Specification for Ferrosilicon
A21-94(1999) Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use
A1-00 Standard Specification for Carbon Steel Tee Rails
D2828-96 Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type